Canon All in One Printer PIXMA MX432 User Manual

<< Previous  
Getting Your Multifunction  
Back On Your Network  
After A Router Or Network Change  
PIXMA MX432  
Windows and Mac OS  
 
1
 
Preparing to Connect My Multifunction  
To My Network  
Network Requirements  
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is  
complete, and that the computer is connected to the network.  
Wireless Connection  
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that  
configuration of the computer and access point or router is complete.  
 
3
 
Connecting to the Network  
Connect the PIXMA MX432 to Your Wireless Network  
To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the settings  
on the Multifunction need to be changed  
Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions On the  
following screen, select the Start Setup Again option  
 
4
 
Connecting to the Network  
On the Connection Method Selection screen, be sure to select Wireless Connection  
When the Printer Setup screen appears, click Next. You will be setting up the printer the same way as a first-time setup.  
Follow the instructions until the Completion of Connection screen. It is not necessary to re-install the software. Click Next on the  
Completion of Connection screen, then click Back, then Exit. Setup is now finished  
 
5
 
Connecting to the Network  
If you can’t find your CD-ROM, you may download the MX430 series Mini Master Setup, which includes the same step-by-step installation as the  
CD-ROM, by following the instructions below:  
2. Select the operating system and version of your computer (see example below).  
3. Expand the ‘Drivers’ section, if necessary, by clicking the red triangle.  
4. Click on the ‘MX430 series Mini Master Setup’ entry  
5. After reading the details and disclaimer, click ‘I Agree – Begin Download’ and save the file to your computer.  
6. Once the download is complete, double-click the file from its download location to begin the installation.  
7. Follow the same instructions as when using the Setup CD-ROM. See the previous page  
 
6
 

BenQ Projector Accessories MP515 ST User Manual
Black Decker Blower BV3100 User Manual
Black Decker Fan FS1600R User Manual
Brother Saw MW 140BT User Manual
Bryant Air Conditioner 39006DP11 B User Manual
Canon Camcorder 153331444 User Manual
Canon Webcam RE 350 User Manual
Carrier Air Conditioner 30GA User Manual
Chamberlain Garage Door Opener 2280 267 User Manual
Cisco Systems Network Card OL 2485 20 User Manual